I have created an HTTP receiver to receive data from a GSM based logger and it is working fine so I decided to add a second one and did a copy of the first one and then changed the name of the device.
I then did the same with the simple graphical display I created and then edited each of the fields to the other HTTP receiver data.
I keep seeing the data from the first receiver in the second one for data that is not transmitted by the other unit. The TIMESTAMP string is also from the first device.
This is what I see for the first HTTP receiver
Device ID: mntwell1
timestamp=26 Nov 2015 04:03:19
And this is the second one.
Device ID: mntwell2
timestamp=26 Nov 2015 17:15:37
The value of the data is not important as the second one has no sensors connected. You can see that it has the correct device ID but I still see temperature readings in the graphical display and in the datapoints table for this second device. Pressure from device 1 is sometimes showing in the data points for device 2 and visa versa. NOT GOOD.
Is it because I have 2 HTTP receivers that this is causing the issue? Surely it should work?