- A time scheduler created that trigger on every hour and trigger off after 10 minutes.
- An event under scheduler define with as shown below.
note: the target should not be needed if execution by script but the program required to put some parameter so I put other datapoints. When test the script if shows success false but the on trigger always executed properly except the inactive event.
I tried also to use set to static value and define additional context but in this case only the target is changing in on event.
3.Here the virtual datasource and point use in the simulation
Note that I make sure that it is settable
- Monitor the datpoints details and it trigger on every hour (4:00pm (Set point handler) but never executed the trigger off / inactive value script.