was Change the cron to 0 0/5 * * * ?
When I press validate icon appear: (ReferenceError: "passwordPointp385" is not defined in at line number 1)
I need to put every one data point in the script?,
If your answer is Yes, it means that I need to repeat thsi script for every one datapoint.?
Is correct how i wrote the scripts?
passwordPointp385.set(0xdeadbeef); //send this hexidecimal value as a set to the register
passwordPointp386.set(0xdeadbeef); //send this hexidecimal value as a set to the register
if the customer change the current password, how we will get the new hex value?
I will appreciate so much your support
thanks, Jorge G
Sorry Didnt work, please let me to explain You.
The controller have 12 Batteries.
Each batteries need the password
Each password must be "0000".
Can créate just one scripting datasource for all batteries?
Where I can check that the password is (0000), without brackets?
I need to change something in every original point (Write Type: Not settable)
Please could You check, because i have some thing wrong
In advance thanks so much
Hello, please Your support, there is a controller that need to receive a pasword every time that i need to get information, I send once it manually. but if i lost the communication for more tan 5 minutes the controller need again this password
I créate a point but didnt work. how i can send this password every 5 min???
Please Your support
Hi Phil, it is very easy, the customer have a controller with a internal web server(if I put the ip address in a browser then I will connect with the controller)
let me to ask, Is not posible to have a Link component in the graphics view, think that the most of controllers have a connection by internet browser (Firefox or IExplorer or another).
At the end, please i will try to add a link....
thanks so much Phil
Our experience in this platform started with ScadaBR, in our graphic views usually we use a link (it is to open a web view)
When we wanted to apply this feature in Mango Automation Platform it doesnt exist..
Please could You tell me how or where we can found the “Link” graphic view components.
In the picture You can see how our customer see every controller, in a graphic view. (they doing a right click over the link, could connect with the controller)
Please could You give me Your support, Ineed to add a HTML Link to Graphic view
In advance thanks so much
Thanks so much, with Your script, now it is working... it is the most important thing, because the customer is testing this Scada platform.
Soon We will start checking what happen with this controller and them kind of SNMP Data.
Again, thanks for Your support