Mango software version (core): 3.5.6 (current at 28/5/2019)
I have tried to change a couple of MangoES's from Static IP (on eth0, IPv4) to DHCP. When I plug in the USB stick, the LED's flash on then off. I then power cycle the device, but the settings aren't changed. I have successfully used the USB stick to change from dhcp to static, so I know the process works in general. I am using the same file - '\script-enabled\networking.properties'. The read_me file on the drive has an example for changing to static, but not one for changing to DHCP. It looks pretty straightforward - I believe I have followed the syntax rules in the READ_ME file, but can't get it to work. If I go into System Settings -> MangoES configuration on the old UI, I can manually change to dchp without a problem. I checked the mango log files, but couldn't see anything logged about this. I have attached screenshots of files and config I'm using.
The settings I'm starting with:
The file I'm using to change to dhcp - does NOT work:
Another file I have tried with more fields - still doesn't work:
This is a file I use to change the other way (ie to a static address) - it works fine: