• J
    Jorge Gonzalez

    Thanks Craig,
    was Change the cron to 0 0/5 * * * ?
    When I press validate icon appear: (ReferenceError: "passwordPointp385" is not defined in at line number 1)
    I need to put every one data point in the script?,
    If your answer is Yes, it means that I need to repeat thsi script for every one datapoint.?
    Is correct how i wrote the scripts?
    passwordPointp385.set(0xdeadbeef); //send this hexidecimal value as a set to the register
    passwordPointp386.set(0xdeadbeef); //send this hexidecimal value as a set to the register
    if the customer change the current password, how we will get the new hex value?
    I will appreciate so much your support

    thanks, Jorge G

    posted in How-To read more
  • J
    Jorge Gonzalez

    Sorry Didnt work, please let me to explain You.
    The controller have 12 Batteries.
    Each batteries need the password
    Each password must be "0000".
    Can créate just one scripting datasource for all batteries?
    Where I can check that the password is (0000), without brackets?
    I need to change something in every original point (Write Type: Not settable)
    Please could You check, because i have some thing wrong
    0_1547849915936_Scripting DSource.png

    In advance thanks so much

    Jorge G

    posted in How-To read more
  • J
    Jorge Gonzalez

    Hello, please Your support, there is a controller that need to receive a pasword every time that i need to get information, I send once it manually. but if i lost the communication for more tan 5 minutes the controller need again this password
    0_1547832314465_Resend Password.png . 0_1547832198686_Password.png
    I créate a point but didnt work. how i can send this password every 5 min???
    Please Your support

    posted in How-To read more
  • J
    Jorge Gonzalez

    Hi Phil, it is very easy, the customer have a controller with a internal web server(if I put the ip address in a browser then I will connect with the controller)
    0_1546630001403_HTML Link_3.jpg
    0_1546630251693_HTML Link_4.jpg

    let me to ask, Is not posible to have a Link component in the graphics view, think that the most of controllers have a connection by internet browser (Firefox or IExplorer or another).

    At the end, please i will try to add a link....

    thanks so much Phil

    Jorge G

    posted in How-To read more
  • J
    Jorge Gonzalez

    Our experience in this platform started with ScadaBR, in our graphic views usually we use a link (it is to open a web view)
    When we wanted to apply this feature in Mango Automation Platform it doesnt exist..
    1_1546627789259_HTML Link_2.jpg 0_1546627789259_HTML Link.jpg
    Please could You tell me how or where we can found the “Link” graphic view components.

    In the picture You can see how our customer see every controller, in a graphic view. (they doing a right click over the link, could connect with the controller)

    Please could You give me Your support, Ineed to add a HTML Link to Graphic view

    In advance thanks so much

    posted in How-To read more
  • J
    Jorge Gonzalez

    Thanks so much, with Your script, now it is working... it is the most important thing, because the customer is testing this Scada platform.

    Soon We will start checking what happen with this controller and them kind of SNMP Data.
    Again, thanks for Your support

    posted in How-To read more
  • J
    Jorge Gonzalez

    see it please, now i change again from numeric type to multistate type. now is working0_1544645824168_Alphanumeric Value_last.png
    Please could You tellme how to make a script.

    posted in How-To read more
  • J
    Jorge Gonzalez

    Hello, Phil. I check it and the integers work as numeric but gauge didnt work as numeric
    0_1544640518896_SNMP Gauge and numeric.png
    Coudl I make a meta data source and add a script that divide in 10 or multiply for 0.1???

    posted in How-To read more
  • J
    Jorge Gonzalez

    Phil, I change the type to numeric, i lost the values...0_1544565722588_SNMP Gauge to numeric.png

    posted in How-To read more
  • J
    Jorge Gonzalez

    I will check, but its not Numeric0_1544564581208_SNMP Gauge.png

    posted in How-To read more
  • J
    Jorge Gonzalez

    Thanks so much, You are right, we check it and it work. Thank You
    The other script... will be for the oficial integration.
    till now we are showing to the customer that the platform can work with their controller

    posted in How-To read more
  • J
    Jorge Gonzalez

    Phii, I check it, but is Multistate
    0_1544560626905_Snmp Multistate.png
    In the other thread, tha value is alphanumeric.

    please Your support

    Thanks in advance

    posted in How-To read more
  • J
    Jorge Gonzalez

    some controllers send values that are wrong, because the value came without decimal point, just we have two options:
    Divide for 10 or multiplicate for 0,1
    0_1544558407938_SNMP value without scale.png
    Please i need the script expresión to get the real value

    posted in How-To read more
  • J
    Jorge Gonzalez

    Dear Phil, I made some tests with some values and it work.. even it must be done one by one value. (i think there are more than 800 different values).

    Phil. please what we need now to add something to the script to multiplying the final value x20. It is because the value is %, I think that will be better, if it is shown as a number i.e. 70% = 20x70=1400

    posted in How-To read more
  • J
    Jorge Gonzalez

    Thanks so much Phil, I will check Your sugestion, I guess that it may work... thanks again

    I will keep in touch about it

    posted in How-To read more
  • J
    Jorge Gonzalez

    There are 110 controller, where every data come with the units, I mean for example starting voltage battery: 13.7V, engine temperature 47,0celsius, etc
    • All data are SNMP
    • The type of data is OctectString (it from MIB File)
    • In Mango Scada every data points is configured as Alphanumeric type and Not Settable
    • All information is getting with out problema.

    The problem is that with this kind of data (Alphanumeric), is not possible to get a graph also is not possible to configure limits alarms maximum or minimum. (Event detector)

    Question, If I have and get all information, ¿could I have any way to change all this information from Alphanumeric to Numeric??
    Im thinking or guess is possible to use some virtual datasources where datapoint values will be obtained from this alphanumeric information… 0_1544013662101_Alphanumeric Value.png

    posted in How-To read more
  • J
    Jorge Gonzalez

    Hi, thanks so much for Your support, You are right with alphanumeric type i got the values... now i need to check why with another type as octetct string didnt work. I will back soon with this issue.

    thanks so much again
    Jorge G

    posted in How-To read more
  • J
    Jorge Gonzalez

    let me to ask You, how I get the correct infomation for any OID with SNMP Host Testing??
    I have made all combinations with DataType and Set Type without results, but i put the OID in SNMP Host Testing and it work without problem.

    posted in How-To read more
  • J
    Jorge Gonzalez

    Dear Phil, I found it in the MIB File..Also it say that the set Type is Octect String..
    -- 1.3.6.1.1.1
    group1BatteryNum OBJECT-TYPE
    SYNTAX OCTET STRING
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
    "Description."
    ::= { batteryNumEntry 1 }

    posted in How-To read more
  • J
    Jorge Gonzalez

    Thanks so much Phil,
    I check it with a Mib Browser and I got the correct Value and the result Type was Octect String,
    I set the The Set Type as octect string in the Scada but i had not results, now im changing the DataType... unfortunately till now with out good result.
    Again, Thanks so much for Your support

    Jorge G

    posted in How-To read more